If you’re following all steps according to the Instructions and Turbo Mod is not working, there could be 2 reasons:
1. There are 2 components/variables in the Turbo Mod setting (2ND Sub-Mode) that control the action. The first one is the time a stock button is being pressed. By default, this time is 100 ms. The second one is the time a stock button is being released. By default this time is 150ms. (When you hold down a Macro Button, the modchip is pressing and releasing a paired stock button on your behalf). The graphic engine settings of some games may not recognize such a quick pace and, therefore, won’t accept the turbo input. Try increasing those numbers slightly via a Programming Mode. As a reference point, you can use a blink of an eye, which is 200-300 ms.
2. The custom settings have been changed and there is too much time between button presses. The Off Time (the pause between stock button presses) can be made as long as 3 seconds. If the Macro Button is released before the Off Time ends, the Turbo Function terminates before the Mod Chip can press the stock button. Stick to low numbers at first and see which pace (timing) works best with the game/situation.
Comments
0 comments
Please sign in to leave a comment.